| Customization: | Available |
|---|---|
| Material: | Stainless Steel |
| Usage: | Print, Semiconductor, Automation and Control, Robot, Pneumatic System |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
CRB2-Z Series has a single or double vane, and the rotary actuator is available in 10, 15, 20, 30, and 40 bores. Single vane type use specially designed seals and stoppers which enable this compact type actuator to rotate up to 270 degrees. Double vane type is standardized for 90 and 100 degrees.
1. Many variations of shaft-end shape (6 types)
The mounting position of the compact auto switch can be set freely. The switch can be fixed in the desired position in the circumferential direction.
2. Direct mounting
The rotary actuator body can be mounted directly. (Not possible to mount directly for sizes 10 to 40 with functional units.)
3. Connecting port location: Side ported or Axial ported
The port location can be selected according to the application. (Size 10 to 40 with units are mounted side ported only.)
4. Double vane type is standardized for 90° and 100°.
The outside dimensions of the double vane type are equivalent to that of the single vane type (except size 10). Double vane type construction can get twice the torque of the single vane type.
Double Vane Specifications
|
Bore (mm) |
10 | 15 | 20 |
30 |
40 | |
| Rotating angle | 90°, 100° | |||||
| Working medium | Air(Non-lube) | |||||
| Proof pressure |
1.05MPa |
1.5MPa | ||||
| Working temperature | 5 to 60ºC | |||||
| Max. working pressure | 0.7MPa | 1.0MPa | ||||
| Min. working pressure | 0.2MPa | 0.15MPa | ||||
| Rotation time adjustment range s/90°*1) | 0.03 to 0.3 | 0.04 to 0.3 | 0.07 to 0.5 | |||
| Allowable kinetic energy | 0.0003J | 0.0012J | 0.0033J | 0.02J | 0.04J | |
| Shaft load | Allowable radial load | 15N | 15N | 25N | 30N | 60N |
| Allowable thrust load | 10N | 10N | 20N | 25N | 40N | |
| Port location | Side ported or Axial ported | |||||
| Port size (Side ported, Axial ported) |
M3×0.5 | M5×0.8 | ||||
| Angle adjustable range*2) | 0 to 90° | |||||
Note 1) Make sure to use the actuator within the adjustable speed range. Exceeding the low speed range (0.3 s/90°) can cause the unit to stick or not operate.
For size 10, when operation at the maximum speed (0.03 s/90°) is required, the operating pressure should be set to 0.35 MPa or higher.
Note 2) Adjustment range in the table is for 100°.
Single Vane Specification
|
Bore (mm) |
10 | 15 | 20 |
30 |
40 | |
| Rotating angle | 90°, 180°, 270° | |||||
| Working medium | Air(Non-lube) | |||||
| Proof pressure |
1.05MPa |
1.5MPa | ||||
| Working temperature | 5 to 60ºC | |||||
| Max. working pressure | 0.7MPa | 1.0MPa | ||||
| Min. working pressure | 0.2MPa | 0.15MPa | ||||
| Rotation time adjustment range s/90°*1) | 0.03 to 0.3 | 0.04 to 0.3 | 0.07 to 0.5 | |||
| Allowable kinetic energy*1) | 0.00015J | 0.001J | 0.003J | 0.02J | 0.04J | |
| 0.00025J | 0.0004J | 0.015J | 0.03J | |||
| Shaft load | Allowable radial load | 15N | 15N | 25N | 30N | 60N |
| Allowable thrust load | 10N | 10N | 20N | 25N | 40N | |
| Port location | Side ported or Axial ported | |||||
| Port size(Side ported, Axial ported) | M3×0.5 | M5×0.8 | ||||
| Angle adjustable range*3) | 0 to 230° | 0 to 240° | 0 to 230° | |||
*1) Make sure to use the actuator within the adjustable speed range. Exceeding the low speed range (0.3 s/90°) can cause the unit to stick or not operate.
For size 10, when operation at the maximum speed (0.03 s/90°) is required, the operating pressure should be set to 0.35 MPa or higher.
*2) The upper numbers in this section in the table indicate the energy factor when the rubber bumper is used (at the end of the rotation), and the lower numbers indicate the energy factor when the rubber bumper is not used.
*3) Adjustment range in the table is for 270°.
| VPC Box | White Box | Color Box | VPC Carton | Pallet |
Delivery time:
| Conventional Products | Customized Products | Specially Customized Products |
| on the day of payment | 10 workdays | 25 workdays. |
Payment term:
| PayPal | TT | Western Union | DP | LC | Money Gram | Online Bank | Pay Later | DA |
| YES | YES | YES | NO | NO | YES | YES | YES |
YES |
Transportation:
Express (DHL, UPS, TNT, JCEX, FEDEX) is available.
Sea and Air transports are available.
The most suitable transport way will be chosen for you.
Q1: What is your quality assurance?
A: We will inspect one by one before delivery. If the product is damaged in transit or has quality problems, you can choose to refund or resend the product, and the freight will be borne by us.
Q2: What are your terms of payment?
A: TT, we'll show you the photos of the products and packages before you pay the balance.
B: PayPal payment, Bank transfer, and order also available.
Q3: How about the lead time?
A: Normally it will take 3-7 days for our routine products.
Q4: What is your sample policy?
A: Some free samples can be offered if you contact us.
Q5: What about the warranty?
A: 1-year warranty.
){kind=link}