| Customization: | Available |
|---|---|
| Customized: | Non-Customized |
| Certification: | ISO, CE |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Series AC-D FRL unit is a modular 2-combination of the AW filter regulator and AL lubricator, and can be optionally equipped with pressure gauges, digital pressure switches, pressure relief 3-port valves, and IS pressure switches. The AC-D has a max. set pressure of 125 psi and can be used in a wide range of applications.
Product FeatureMost of the features of the AC-A and AC-B have been incorporated into the AC-D clear bowl shroud for complete visibility; embedded gauges and pressure switches; reduced maintenance space and simplified element replacement for the AF-D series filters.
1. Modular design with uniform body style. Mounting interchangeable with existing product
2. Extended range of pipe adapters, interfaces and modular pressure switches.
3. Easy element replacement. Element and bowl are one piece. Replacement can be done manually.
4. Energy saving regulator. Pressure drop: Max. 50% improvement.
5. Reduvced maintenance space: Max. 46% reduction.
6. Rc, NPT or G threads available.
Order Example:
Option/Semi-standard: Select one each for a to j.
Option/Semi-standard Symble: When more than one specification is required, indicate in alphanumeric order.
Model: AC30A-F03DE1-16NR-D.
| Model | AC20A-D | AC30A-D | AC40A-D | AC40A-06-D | AC50A-D | AC60A-D | |
| Component | Filter regulator[AW] | AW20-D | AW30-D | AW40-D | AW40-06-D | AW50-D | AW60-D |
| Lubricator[AL] | AL20-D | AL30-D | AL40-D | AL40-06-D | AL50-D | AL60-D | |
| Port size | 1/8, 1/4 | 1/4, 3/8 | 1/4, 3/8, 1/2 | 3/4 | 3/4, 1 | 1 | |
| Pressure gauge port size *1) [AW] | 1/8 | ||||||
| Working medium | Clean Air | ||||||
| Working temperature*2) | -5 to 60°C (No freezing) | ||||||
| Proof pressure | 1.5Mpa | ||||||
| Max. Operating pressure | 1.0Mpa | ||||||
| Auto drain minimum operating pressure | N.C. [AW] | 0.1MPa | 0.15MPa | ||||
| N.O. [AW] | - | 0.1MPa | |||||
| Set pressure range [AW] | 0.05 to 0.85Mpa | ||||||
| Nominal filtration rating [AW] | 5 µm | ||||||
| Compressed air purity class*3) | ISO 8573-1:2010 [ 6 : 4 : − ]*4) | ||||||
| Drain capacity [AW] | 8 cm³ | 25 cm³ | 45 cm³ | ||||
|
Min. dripping flow rate*5) [AL] |
15 L/min (ANR) |
Port size 1/4: 30 L/min (ANR) Port size 3/8: 40 L/min (ANR) |
Port size 1/4: 30 L/min (ANR) Port size 3/8: 40 L/min (ANR) Port size 1/2: 50 L/min (ANR) |
50 L/min (ANR) | 190 L/min (ANR) | 220 L/min (ANR) | |
| Oil capacity [AL] | 25 cm³ | 55 cm³ | 135 cm³ | ||||
| Recommended lubricant [AL] | Class 1 turbine oil (ISO VG32) | ||||||
| Bowl material [AW/AL] | Polycarbonate | ||||||
| Bowl guard [AF/AL] | Semi-standard (Steel) | Standard (Polycarbonate) | |||||
| Construction [AW] | Relieving type | ||||||
*2) -5 to 50°C for the products with the digital pressure switch.
*3) The compressed air purity class is indicated based on ISO 8573-1:2010 Compressed air - Part 1: Contaminants and purity classes.
*4) The compressed air quality class on the inlet side is [ 7 : 4 : 4 ].
*5) The flow rate is 5 drops or greater/min under the following conditions: Inlet pressure of 0.5 MPa; Class 1 turbine oil (ISO VG32); Temperature at 20°C; Oil adjustment valve fully open. For a circuit that repeatedly turns ON and OFF on the outlet side, make the adjustment so that the average air consumption per minute becomes the minimum dripping flow rate or more.
*2) Drain guide is G1/8 (applicable to the AC20A-D) and G1/4 (applicable to the AC30A-D to AC60A-D).
*3) When pressure is not applied, condensate which does not start the auto drain mechanism will be left in the bowl. Releasing the residual condensate before ending operations for the day is recommended.
*4) If the compressor is small [0.75 kW, discharge flow is less than 100 L/min (ANR)], air leakage from the drain cock may occur during the start of operations. N.C. type is recommended.
*5) When the pressure gauge is attached, a 1.0 MPa pressure gauge will be fitted for standard (0.85 MPa) type. 0.4 MPa pressure gauge for 0.2 MPa type.
*6) Pressure can be set higher than the specification pressure in some cases, but use pressure within the specification range.
*7) A bowl guard is provided as standard equipment (polycarbonate).
*8) A bowl guard is provided as standard equipment (nylon).
*9) The combination of float type auto drain C and D is not available.
*10) Without a valve function.
*11) The combination of metal bowl 2 and 8 is not available.
*12) When choosing with W: Filter regulator drain port, the drain cock of a lubricator will be with barb fittings.
*13) For the pipe thread type: NPT
Cannot be used with M: Round type pressure gauge (with color zone). Available by request for special.The digital pressure switch will be equipped with the unit selection function, setting to psi initially.
*14) For options: E1, E2, E3, E4
*15) : For the pipe thread type: NPT only.
*16) △: Select with options: E1, E2, E3, E4.
| VPC Box | White Box | Color Box | VPC Carton | Pallet |
Delivery time:
| Conventional Products | Customized Products | Specially Customized Products |
| on the day of payment | 10 workdays | 25 workdays |
Payment term:
| Paypal | TT | Western Union | DP | LC | Money Gram | Online Bank | Pay later | DA |
| YES | YES | YES | NO | NO | YES | YES | YES |
YES |
Transportation:
Express (DHL, UPS, TNT, JCEX, FEDEX) is available.
Sea and Air transports are available.
The most suitable transport way will be chosen for you.
Q1: What is your quality assurance?
A: We will inspect one by one before delivery. If the product is damaged in transit or has quality problems, you can choose to refund or resend the product, and the freight will be borne by us.
Q2: What is your terms of payment?
A: TT, we'll show you the photos of the products and packages before you pay the balance.
B: Paypal payment, Bank transfer order also available.
Q3: How about the lead time?
A: Normally it will take 3-7 days for our routine products.
Q4: What is your sample policy?
A: Some free samples can be offered if you contact us.
Q5: How about the warranty?
A: 1 year warranty.
){kind=link}